MSc / BSc Students

Suche


 Former students at the Institute of Biomaterials (Erlangen)

Name Period / Institution / Co-Supervisor Research topic
Maximilian Uhler

2018-2019

Prof. Aldo R. Boccaccini

Wear investigation based on an innovative, anatomic shoulder prothesis with bearing materials inversion 
Frank Bayer

2018-2019

Dr.-Ing. Rainer Detsch,
Prof. Aldo R. Boccaccini

Influence of surface modifications on bone resorbing giant cells 
Swathi Naidu Vakamulla Raghu

2018-2019

Katharina Schuhlade,
Prof. Aldo R. Boccaccini


 Synthesis and analysis of electrospun fiber mats made of natural/synthetic polymers and Boron containing bioactive glass particles as wound dressings
Felix Künzel

2018-2019

Susanne Heid
Prof. Aldo R. Boccaccini

 
Investigation of alginate di-aldehyde/gelatin (ADA-GEL) composite bioinks for biofabrication 
Sonja Kuth

2018-2019

Laura Ramos Rivera
Prof. Aldo R. Boccaccini

Structuring 45S5 Bioglass® surfaces by electrospun polymer fibres 
Andreas Staicu
Andreas Staicu
 

2018-2019

Jonas Hazur
Prof. Aldo R. Boccaccini

 
Development and optimization of a bioink based on oxidized alginate-gelatin hydrogel for bioplotting 
Jonas Röder
Jonas Röder

2018-2019

Qaisar Nawaz
Prof. Aldo R. Boccaccini

The Effect of Sintering Temperature on Crystallization and Mineralization of Sol-Gel Derived Bioactive Glasses/Scaffolds

 
Stefan Endlein
Stefan Endlein

2018-2019

Irem Ünalan
Prof. Aldo R. Boccaccini

Fabrication and characterization of polycaprolactone-based electrospun fiber mats containing phytotherapeutic agents for wound healing
Dalia Dranseikiene
Dalia Dranseikiene

2018-2019

Supachai Reakasame
Prof. Aldo R. Boccaccini

Biofabrication using Methylcellulose Based Bioink 
Corina-Elena Clejanu
Corina-Elena Clejanu

2018-2019

Florian Ruther
Prof. Aldo R. Boccaccini

 
Investigation on the spinnability of different biopolymer-PANi combinations 
Ulli Harlaß
Ulli Harlaß

2018-2019

Irem Ünalan
Prof. Aldo R. Boccaccini

 
Preparation and characterization of phytotherapeutic agents loaded bioactive glass-based scaffolds for bone tissue engineering 
Karoline Teichmann
Karoline Teichmann

2018-2019

Vera Bednarzig, Dr. Rainer Detsch

Prof. Aldo R. Boccaccini

Optimization of 3D bioplotted craniofacial-bone implants based on hydrogel composites 
Daniel Christa
Daniel Christa

2018-2019

Laura Ramos Rivera
Prof. Aldo R. Boccaccini

Surface modification of metallic biomaterials by zein - bioactive glass coatings
Steffen Fastner
Steffen Fastner

2018-2019

Qaisar Nawaz
Prof. Aldo R. Boccaccini

Ag-containing bioactive glass added PEEK coatings by electrophoretic deposition

Tuba Aydemir
Tuba Aydemir

2018 - 2019

Prof. Dr.-Ing. Josefina Ballarre

Prof. Aldo R. Boccaccini

Dual bioactive and antibacterial coatings by spray and electrophoretic deposition for orthopedic applications
Amelie Haslbauer
Amelie Haslbauer

2018 - 2019

Prof. Serena Best, Prof. Ruth Cameron (Cambridge)

Prof. Aldo R. Boccaccini (Erlangen)

"PGS-based biomaterials" (Master thesis carried out at University of Cambridge, UK)
Moritz Gerlich
Anbang Jin

2018

Katharina Schuhladen,
Prof. Aldo R. Boccaccini

Production and characterization of organic-inorganic composite scaffolds for wound healing applications
Anbang Jin
Anbang Jin

2018

Supachai Reakasame,
Prof. Aldo R. Boccaccini

Fabrication and characterization of alginate dialdehyde-gelatin-bioactive glass microcapsules
Hyewon Kim
Hyewon Kim

2018

Dr.-Ing. Kai Zheng,
Dr. Guoxin Tan,
Prof. Aldo R. Boccaccini

3D printing of hydrogel-bioactive glasses composites for biomedical applications
Ksenia Klementyeva
Ksenia Klementyeva

2018

Dr. Aldo Leal-Egaña,
Prof. Aldo R. Boccaccini

Assessment of pathological properties of cancer cells pre-cultured within 3D tumor-like scaffolds
Pratishtha Mukoo
Pratishtha Mukoo

2018

Katharina Schuhladen,
Prof. Aldo R. Boccaccini

Optimization of soy/alginate scaffolds containing bioactive glass for wound healing applications
Aditya Ageng Sulistio
Aditya Ageng Sulistio

2018

Thomas Distler,
Prof. Aldo R. Boccaccini

3D printing alginate-gelatine crosslinked hydrogel for muscle tissue engineering
Varun Tharmalingam
Varun Tharmalingam

2018

Qaisar Nawaz,
Prof. Aldo R. Boccaccini

45S5 Bioglass-based scaffolds coated with mesoporous nanoparticles incorporated with phytotherapeutics for bone tissue engineering
Vincent Weidemann
Vincent Weidemann

2018

Muhammad Maqbool,
Muhammad Atiq Ur Rehman,
Prof. Aldo R. Boccaccini

Antibacterial and bioactive properties of chitosan-based composite coatings deposited by electrophoretic deposition
Lan Vu
Lan Vu

2018

Lena Vogt,
Prof. Aldo R. Boccaccini

Fabrication and characterization of a bilayered patch for cardiac tissue engineering
Julius Weidinger
Julius Weidinger

2018

Marcela Arango Ospina,
Prof. Aldo R. Boccaccini

Antibacterial coatings for bioactive glass-based scaffolds incorporating phytotherapeutic agents
Anne Zimmermann
Anne Zimmermann

2018

Florian Ruther,
Prof. Aldo R. Boccaccini

Improvement of the layer adhesion of composite cardiac patches
Kilian McDonald
Kilian McDonald

2018

Thomas Distler,
Prof. Aldo R. Boccaccini

Investigation of crosslinked alginate-di-aldehyde / gelatin (ADA/Gel) hydrogels for long-term cell culture of 3D bioplotted scaffolds
Svenja Heer
Svenja Heer

2018

Svenja Heise,
Prof. Aldo R. Boccaccini

Fabrication and characterization of gelatin nanoparticulate drug vehicles for coatings on metallic substrates
Antonia Ohlmann
Antonia Ohlmann

2018

Prof. Ulrich Lohbauer (Research Laboratory for Dental Biomaterials, Dental Clinic 1, University Hospital Erlangen)
 
Prof. Aldo R. Boccaccini

Mechanical fatigue testing of dental biomaterials 
Sarah Biser
Sarah Biser

2018

Laura Ramos Rivera,
Prof. Aldo R. Boccaccini

Bioactive and antibacterial composite coatings using electrophoretic deposition
Martin Kapp
Martin Kapp

2018

Dr.-Ing. Kai Zheng,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Interactions between bioactive glasses and proteins
Thomas Kreller
Thomas Kreller

2018

Thomas Distler,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Hierarchical Bioplotting for Cartilage Tissue Engineering
Angela Maria Arias Jaramillo
Angela Maria Arias Jaramillo

2018

Vera Bednarzig,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development of Hydrogel Composite Materials for 3D-Plotted structures for bone regeneration
Markus Hüpgen
Markus Hüpgen

2018

Muhammad Atiq Ur Rehman,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Antibacterial and bioactive properties of ion doped bioactive glass nanoparticle/chitosan/gelatin coatings on PEEK/bioactive glass layers by electrophoretic deposition
Rene Morelle
Rene Morelle

2018

Dr. Liliana Liverani,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Fabrication and characterization of composite electrospun scaffolds for tissue engineering applications
Laura Guetse Dongmo
Laura Guetse Dongmo

 2018

Irem Ünalan
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Fabrication and characterization of phytotherapeutic agent loaded poly (ε–caprolactone) films and electrospun scaffolds for wound healing 
Rigona Drmaku
Rigona Drmaku

 2018

Svenja Heise
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Comparison between different coatings on Mg and Mg alloys 
Ina Sauer
Ina Sauer

 2018

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Technical Supervisor:
Dr. Kirsten Borchers
(Fraunhofer Institut für Grenzflächen- und Bioverfahrenstechnik IGB, Stuttgart)

Fabrication and characterization of thin gelatin based and albumin based hydrogel coatings on PET inserts for the release of vascular endothelial growth factor (VEGF) 
Viktoria Meudt
Viktoria Meudt

2017

Rainer Detsch
Prof. Aldo R. Boccaccini

In-vitro-evaluation of additive manufactured alginate-hydrogels for the cranio-maxillofacial area
Stefanie Klostermeier
Stefanie Klostermeier

2017

Vera Bednarzig
Rainer Detsch (Institute of Biomaterials)
Roberto deCol
Prof. Dr.-med. Karl Meßlinger (Institute of Physiology and Pathophysiology)
Prof. Aldo R. Boccaccini (Institute of Biomaterials)

Adjustment of alginate based bioink properties for improved 3 dimensional dorsal root ganglion cell development
Felix Beyer
Felix Beyer

2017

Svenja Heise,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Chitosan/metal ion doped-bioactive glass coatings on Mg-alloys by electrophoretic deposition
Josephine-Marie Fabert
Josephine-Marie Fabert

2017

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Dr. Norbert Löwa

Feasibility study of magnetic nanoparticle-based generative printing for biomedical imaging
Yuqian Fan
Yuqian Fan

2017

Dr.-Ing. Preethi Balasubramanian,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Metallic ion doped mesoporous bioactive glasses: processing and characterisation
Miao Geng
Miao Geng

2017

Florian Ruther,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrospun biopolymers for cardiac patches application
Konstantin Gottschalk
Konstantin Gottschalk

2017

Dr. Asha Mathew,
Prof. Dietmar W. Hutmacher,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Effect of porosity on antibiotics encapsulation and release of melt electrospun mPCL scaffolds
Lucas Höne
Lucas Höne

2017

Dr. Aldo Leal-Egaña,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Study of Mechanical Stimulation of Cancer Cells Confined within a 3D Tumor-like Environment
Yufei Liu
Yufei Liu

2017

Qaisar Nawaz,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

45S5 bioactive glass scaffolds coated with metallic ion-doped mesoporous bioactive glass particles for bone tissue engineering
Anna-Maria Schmid
Anna-Maria Schmid

2017

Lena Vogt,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrospun gelatin fibers for cardiac tissue engineering
Sebastian Schulte
Sebastian Schulte

2017

Nicoletta Toniolo,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Novel geopolymer materials incorporating red mud
Andreas Schwab
Andreas Schwab

2017

Dr. Aldo Leal-Egaña,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Study of Mechanical Stimulation of Cancer Cells Confined within a 3D Tumor-like Environment
Theresa Reiter
Theresa Reiter

2017

Katarina Schuhladen,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Bioactive glass scaffolds coated with gelatin as carrier for bioactive molecules
Alexander Preis
Alexander Preis

2017

Dr. Liliana Liverani,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Fabrication and characterization of electrospun poly (epsilon – caprolactone)-blended scaffolds for soft tissue engineering
Tanja Panick
Tanja Panick

2017

Dr.-Ing. Jasmin Hum,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Bioactive glass-based scaffolds coated with gelatin for sustained release of biomolecules
Dominik Heiß
Dominik Heiß

2017

Lena Vogt,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Fabrication and characterization of poly(glycerol sebacate) – gelatin electrospun scaffolds for cardiac tissue engineering
Zoya Hadzhieva
Zoya Hadzhieva

2017

Supachai Reakasame,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development of Bioactive Glass Containing Resorbable Polymer-Based Scaffolds for Tissue Engineering Applications
Carola Forster
Carola Forster

2017

Svenja Heise,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic deposition of chitosan-based coatings with drug delivery capability
Janina Dörflein
Janina Dörflein

2017

Francesca Ciraldo,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Cytocompatibility of 3D 45S5 bioactive glass-based® scaffolds coated with metal ion doped mesoporous bioactive glass
Franziska Dellert
Franziska Dellert

2017

Muhammad Atiq Ur Rehman,
Yuyun Yang,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic deposition of protein coatings on pretreated Magnesium
Matthias Eckstein
Matthias Eckstein

2017

Dr.-Ing. Rainer Detsch,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Bioplotting of different materials into complex geometries for tissue engineering
Marcela Arango Ospina
Marcela Arango Ospina

2017

Abirami Sengottuvelan,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Design and development of Ag-doped mesoporous bioactive glass based scaffolds derived from natural marine sponges
Marco Mederer
Marco Mederer

2017

Abirami Sengottuvelan,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Bioactivating TiO2 bone scaffolds by bioactive glass coatings
Magdalena Schlesak
Magdalena Schlesak

2017

Francesca Ciraldo,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Bioactive glass coated surgical sutures with antibacterial properties for tissue engineering and wound healing applications
Maximilian Meuter
Maximilian Meuter

2017

Dr. Gustavo A. Abraham, Dr. Guadalupe Rivero, Dr. Liliana Liverani,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

pH-Sensitive nanofibrous materials for wound healing
Thomas Schuffenhauer
Thomas Schuffenhauer

2016 - 2017

Dr.-Ing. Rainer Detsch
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Additive manufacturing of hydrogel-composite multilayers
Thomas Distler
Thomas Distler

2016 - 2017

Dr.-Ing. Rainer Detsch
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Vessel bioplotting for regenerative approaches
Yeseul Sim
Yeseul Sim

2016 - 2017

Lukas Gritsch
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Antibacterial chitosan-based composites for tissue engineering
Jeonil Kang
Jeonil Kang

2016 - 2017

Kai Zheng
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development and characterization of metal ion doped mesoporous bioactive glassnanoparticles with antibacterial and angiogenic properties
Målin Schmidt
Målin Schmidt

2017

Tobias Igelspacher
Prof. Dr. Bernhard Hensel (Max Schaldach-Stiftungsprofessur für Biomedizinische Technik)

Dr.-Ing. Rainer Detsch
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Investigation of extra cellular matrix components for 3D printing
Khushdeep Sharma
Khushdeep Sharma

2017

Svenja Heise
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic deposition of biopolymer coatings on pure magnesium
Philipp Müller
Philipp Müller

2017

Nicoletta Toniolo
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Waste derived geopolymers: processing and properties
Franziska Zenger
Franziska Zenger

2016 - 2017

Thomas Meincke
Prof. Robin N. Klupp Taylor
Dr.-Ing. Jasmin Hum
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development of Ag coated bioactive glass scaffolds by an electroless method
Julia Weber
Julia Weber

2016 - 2017

Prof. Dr. med. Bernd Rolauffs
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Microcontact printing of cellular adhesion points with defined geometries for biomechanical applications
Anja Stenger
Anja Stenger

2016 - 2017

Prof. Dr. Ulrich Lohbauer (University Hospital Erlangen, Dental Clinic 1)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Hydrolytic degradation of dental CAD/CAM composites
Ruth Meißner
Ruth Meißner

2016 - 2017

Dr. Liciane Bertol (Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, Brazil)
Muhammad Atiq Ur Rehman

Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Bioprinted 3D calciumphosphate scaffolds with antibiotic releasing capability
Maik Haase
Maik Haase

2016 - 2017

Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Inkjet printing of cell loaded hydrogels
Caroline Gräser
Caroline Gräser

2016 - 2017

Francesca Ciraldo
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Ion releasing bioactive glass scaffolds with antibacterial properties
Lukas Esper
Lukas Esper

2016 - 2017

Seray Kaya
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development and Characterization of Antibacterial Mesoporous Bioactive Silicate Glasses
Johanna Dück-Bularca
Johanna Dück-Bularca

2016 - 2017

Laura Ramos Rivera
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Absorption minimizing coatings for PDMS microfluidic organ-on-a-chip devices
Valeriee De Abreu
Valeriee De Abreu

2016 - 2017

Laura Ramos Rivera
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic deposition of bioactive glass-protein composite coatings
Salvatore Chiera
Salvatore Chiera

2016 - 2017

Dr. Preethi Balasubramanian
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Synthesis and characterisation of metallic ion doped mesoporous bioactive glass particles
Simon Berghaus
Simon Berghaus

2016 - 2017

Muhammad Atiq Ur Rehman
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

EPD based chitosan coatings on 316L stainless steel
Vera B. Bednarzig
Vera B. Bednarzig

2016

Dr. R. Detsch
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Improvement of advanced alginate based hydrogel systems for biofabrication
Katharina Schuhladen
Katharina Schuhladen

2016

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Prof. Ipsita Roy (University of Westminster, UK)

Development of biopolymer-inorganic filler composites for tissue engineering
Maria Crackau
Maria Crackau

2016

Prof. Dr. med. Christoph H. Lohmann (Universitätsklinikum Magdeburg A. ö. R.)
Prof. Aldo R. Boccaccini

Characterisation of functional articular surfaces with the use of elaborated manufacturing testing methods
Susanne Heid
Susanne Heid

2016

Prof. Dr. med Christoph Alexiou (HNO-Klinik Erlangen, SEON)
Prof. Aldo R. Boccaccini

Tissue plasminogen activator (t-PA) functionalized iron oxide nanoparticles for targeted clot dissolution
Natascha Kaufmann
Natascha Kaufmann

2016

Preethi Balasubramanian
Prof. Aldo R. Boccaccini

Development and characterisaton of borosilicate glass based scaffolds for bone tissue engineering
Xiaoyang Meng
Xiaoyang Meng

2016

Dr. Liliana Liverani
Prof. Aldo R. Boccaccini

Fabrication and characterization of multilayered electrospun scaffolds for interface tissue engineering applications
Philip Steinmetz
Philip Steinmetz

2016

Dr. Reto Luginbuehl (RMS Foundation, Schweiz)
Prof. Aldo R. Boccaccini

Testing of Design Criteria for the Cleanability in the Reprocessing of Medical Devices
Tobias Wirth
Tobias Wirth

2016

Svenja Heise
Prof. Aldo R. Boccaccini

Development of a new class of protective coatings for Mg alloys
Lars Vester
Lars Vester

2016

Samira Tansaz
Prof. Aldo R. Boccaccini

Fabrication and characterization of natural-based polymers electrospun fibers for soft tissue engineering
Kristin Schnepf
Kristin Schnepf

2016

Francesca Ciraldo
Prof. Aldo R. Boccaccini

Development of a composite coating with ion releasing function for surgical sutures
Simon Beck
Simon Beck

2016

Prof. U. Lohbauer (Zahnklinik, Universitäts Krankenhaus Erlangen)
Prof. Aldo R. Boccaccini

Surface morphology of lithiumdisilicate ceramics
Melanie Baier
Melanie Baier

2016

Dr.-Ing. Jasmin Hum
Prof. Aldo R. Boccaccini

Development and characterization of biomolecule-functionalized 45S5 bioactive glass-based scaffolds for bone tissue engineering
Aditya Ageng Sulistio
Aditya Ageng Sulistio

2016

Barbara Myszka
Prof. Aldo R. Boccaccini

Influence of processing conditions on the morphology of CaCO3 particles
Chunjing Zhao
Chunjing Zhao

2016

Dr. Jasmin Hum
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Novel scaffolds for bone tissue engineering based on borosilicate glass
Felix Künzel
Felix Künzel

2016

Supachai Reakasame
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Evaluation of ADA-keratin composite hydrogels with nanoscale bioactive glass particles for tissue engineering
Shahzad Hafeez
Shahzad Hafeez

2016

Taimoor H. Qazi (Charite, Berlin)
Dr. Evi Lippens (Charite, Berlin)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development of a biomaterials strategy based on 45S5 Bioglass® and alginate to target bone healing
Rene Stein
Rene Stein

2016

Preethi Balasubramanian
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Mesoporous bioactive glass particles: synthesis and characterisation
Sonja Kuth
Sonja Kuth

2016

Laura Ramos Rivera
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Structuring 45S5 Bioglass® surfaces by electrospun polymer fibres
Marcel Vogel
Marcel Vogel

2016

Muhammad Atiq Ur Rehman
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic Deposition of biopolymer/Bioglass based multilayer composite coatings for biomedical applications
Azim Yazizi
Azim Yazici

2016

Svenja Heise
Prof. S. Virtanen (WW4)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development of a bioactive and protective coatings on Mg-alloys
Jannik Dippel
Jannik Dippel

2016

Laura Ramos Rivera
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Optimization of parameters of biopolymer–Bioglass® coatings on 316L stainless steel produced by EPD

Lena Vogt
Lena Vogt

2016

Dr. Liliana Liverani
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Fabrication and characterization of poly(glycerol sebacate)-based electrospun scaffolds for cardiac tissue engineering

Maria-Elli Kotzampasi
Maria-Elli Kotzampasi

2016

Dr. Kirsten Borchers (IGB Stuttgart)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Synthesis and Characterization of biobased hydrogels for controlled release of growth factors 

Jonas Lacina
Jonas Lacina

2016

Dr. Liliana Liverani
Dr. Judith A. Roether (WW5)

Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Fabrication and characterization of electrospun poly(ε –caprolactone)-based fibers by using benign solvents 

Laine Paidere
Laine Paidere

2016

Elena Boccardi
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Ordered mesoporous silica as functional coatings for 45S5 BG scaffolds

Nima Meyer
Nima Meyer

2015 - 2016

Laura Ramos Rivera
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic deposition of polymer-bioactive glass composite coatings: development and characterisation

Beibei Wu
Beibei Wu

2015 - 2016

Dr. Liliana Liverani
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Mechanical and biological characterization of electrospun chitosan-based scaffolds for tissue engineering applications

Jiaying Xu
Jiaying Xu

2015 - 2016

Kai Zheng
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

 Sol-gel production and characterisation of nanoscale bioactive glass particles

David Scherb
David Scherb

2015 - 2016

Yuyun Yang
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Surface modification applied to Magnesium to improve the corrosion resistance and biocompatibility for biomedical applications 

Kiran Saed
Kiran Saed

2015 - 2016

Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Chemical modification of magnesium surfaces to improve corrosion resistance 

Florian Ruther
Florian Ruther

2015 - 2016

Dr. Rainer Detsch
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Improvement of hydrogel processing for biofabrication approaches 

Stanislava Mlinar
Stanislava Mlinar

2015 - 2016

Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Degradation behavior of hydrogels based on alginate di-aldehide (ADA) and encapsulated biomolecules 

Isabel Kugler
Isabel Kugler

2015 - 2016

Laura Ramos Rivera
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development and characterization of biopolymer-bioactive glass composite coatings on metallic substrates by electrophoretic deposition 

Roman Günther
Roman Günther

2015 - 2016

Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Ag-doped mesoporous silica for antibacterial applications 

Steffen Fastner
Steffen Fastner

2015 - 2016

Dr. Liliana Liverani
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

 Fabrication and characterization of electrospun chitosan-based nanofibrous scaffolds for tissue engineering

Moritz Debler
Moritz Debler

2015 - 2016

Valentina Miguez Pacheco
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Polymer coated and infiltrated bioactive glass scaffolds exhibiting malleable behaviour 

Ronja Fries
Ronja Fries

2015 - 2016

Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Fabrication of alginate based composite hydrogels as capsules and 3D scaffolds for soft tissue engineering

Steffen Egly
Steffen Egly

2015 - 2016

Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Hierarchical, porous materials for bone tissue engineering

Marcela Arango Ospina
Marcela Arango Ospina

2015 - 2016

Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development and characterization of degradable scaffolds for soft tissue engineering based on zein
Houda Ichanti
Houda Ichanti

2015 - 2016

Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Nanostructured bioactive surfaces for bone tissue engineering 

Matthäus Popov
Mattäus Popov

2015

Kai Zheng, Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Influence of bioactive glass on bioactivity and mechanical properties of composite films

Taotao Yu
Taotao Yu

2015

Dirk Dippold, Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Process optimization of PCL-collagen fibers for tissue engineering
Andreas Völkl
Andreas Völkl
 

2015

Svenja Heise,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Comparison of Bioglass/chitosan coatings on metallic substrates obtained by electrophoretic deposition or by dip coating 
Marvin Valley
Marvin Valley

2015

Abi Sengottuvelan,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development of titanium dioxide scaffolds for bone tissue engineering
Fabian StemmlerFabian Stemmler

2015

Abi Sengottuvelan,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Preparation of mesoporous silicate spheres and their drug loading and degradation behavior
Marc SteinbergerMarc Steinberger 2015


Elena Boccardi,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Ion doped mesoporous glasses: development and characterisation 
Andreas Staciu
Andreas Staciu
2015

Marina Pöttler,
Prof. Christoph Alexiou (Section of Experimental Oncology and Nanomedicine),
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Evaluation of cyto- and genotoxicity of different ironoxide nanoparticles 
Niclas Reiter
Niclas Reiter
2015

Dr. Julia Will,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Bioactive glass-CaP composites for bone regeneration 
Navina NadesalingamNavina Nadesalingam 2015

Valentina Miguez-Pacheco,
Prof. Robin Klupp Taylor (Institute of Particle Technology),
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Functionalisation of bioactive glass scaffolds 
Andreas Leber
Andreas Leber
2015

Svenja Heise,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic deposition of chitosan-bioactive glass coatings 
Isabelle Kaiser
Isabelle Kaiser
2015

Elena Boccardi,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Polymeric films with drug delivery capability for soft tissue engineering 
Ben Huang
Ben Huang
2015

Elena Boccardi,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Surface functionalisation of Bioglass-based scaffolds for drug delivery applications  
Patrick HöinghausPatrick Höinghaus 2015

Yuyun Yang,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Organic-inorganic coatings for Mg alloys based on electrophoretic deposition (EPD) 
Christine Heusler
Christine Heusler
2015

Kai Zheng,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Metal doped bioactive glass nanoparticle/polymer composites for bone regeneration 
Verena Hahn
Verena Hahn
2015

Elena Boccardi, Anahí Philippart,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Bioactive glasses-based scaffolds with drug delivery capability 
Tim Freund
Tim Freund
2015

Tobias Zehnder,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Fused Deposition Modelling of Biopolymer Scaffolds 
Tim Forgber
Tim Forgber

2015

Dr. R. Detsch,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Degradation behavior of hydrogels used for bioprinting 
Philipp Distler
Philipp Distler

2015

Seray Kaya,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Biomedical coatings based on drug added polymers by electrophoretic deposition (EPD) 
Anna-Lena Böhm
Anna-Lena Böhm

2015

Samira Tansaz,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development and characterization of hydrogel membranes for soft tissue engineering 
Corinna Hager
Corinna Hager

2015

Bapi Sarker, Tobias Zehnder,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Hydrogel-bioactive glass composites for soft tissue engineering  
Robert Baber
Robert Baber

2015

Dirk Dippold, Yaping Ding,
Prof. Dr.-Ing. habil. Aldo R. Boccaccin

Effect of silica nanoparticles on highly aligned polymer fibers for tissue engineering applications 
Maike Nienaber
Maike Nienaber

2015

Giulia Rella,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Fabrication and characterization of fibrous zein scaffolds for tissue engineering using benign solvents
Katja Obri
Katja Obri

2015

Siegfried Weller Institut für Unfall-medizinische Forschung,                       Berufsgenossenschaftliche Unfallklinik Tübingen,
Eberhard Karls Universität, Tübingen

Biomimetic hydrogel-architecture to approach the natural aggrecan-collagen synergism as hydrodynamic damping-system of cartilaginous tissues
Nicolas Neels
Nicolas Neels

2014 - 2015

Enhancing the mechanical properties of sol-gel derived bioactive glass scaffolds
Roman Wolf
Roman Wolf

2014 - 2015

Prof. Dr. Ulrich Lohbauer (Universitätsklinikum Erlangen, Zahnklinik 1),
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Determination of Fracture Mechanics with Nano-Hybrid Filling Material in the Area of Dental Biomaterials
Selma Uzun
Selma Uzun

2014 - 2015

Elena Boccardi,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Novel bioactive glass foams with drug delivery capability
Svenja Koch
Svenja Koch

2014 - 2015

Yuyun Yang,
Prof. Sanna Virtanen (WW4),
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development of polymer coatings for Magnesium alloys
Ann-Katrin Durmann
Ann-Katrin Durmann

2014 - 2015

Samira Tansaz,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development of alginate-protein based hydrogels for biofabrication
Silke Bodemer
Silke Bodemer

2014 - 2015

Dr. Julia Will,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Hydroxyapatite/Bioglass® and TCP (Tricalcium phosphate)/Bioglass® composite scaffolds for bone tissue engineering
Yvonne Schröder
Yvonne Schröder

2014 - 2015

Dr.-Ing. Rainer Detsch,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Printed 3D Scaffolds for Bone Tissue Engineering
Maria Elli Kotzampasi
Maria-Elli Kotzampasi

2014 - 2015

Kai Zheng,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Sol-gel derived silica nanospheres for drug delivery
Sebastian Blob
Sebastian Blob

2014 - 2015

Dr.- Ing. R. Detsch,
Prof. Dr. –Ing. habil. Aldo R. Boccaccini

Design and development of convenient printing-systems to create tissue structures in the context biofabrication strategies
Maria Scharpf
Maria Scharpf

2014 - 2015

Anahi Philippart,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

 

Development of bone scaffolds based on mesoporous bioactive glasses
Daniel Subatzus
Daniel Subatzus

2014 - 2015

Dr. S. Lyer
Prof. C. Alexiou
both: (Section of Experimental Oncology and Nanomedicine),
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Production and investigation of SPIONs linked to photosensitizers for the combination of Magnetic Drug Targeting and photodynamic therapy
Kathrin Stadelmann
Kathrin Stadelmann

2014 - 2015

Dr. Judith Bortuzzo
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Tubular structures for soft tissue engineering
Anne Pfeuffer
Anne Pfeuffer

2014 - 2015

Tuan Vi (Continental Europe Campus), Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Analysis and evaluation of the current sandblasting and shot peening process step as a surface treatment for bone screws and design of a state-of-the-art process
Katharina Rzepka
Katharina Rzepka

2014

Alexander Hoppe
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development and characterisation of metallic ion releasing silicate bioactive glasses 
Tamas Steinbach
Tamas Steinbach

2014

Samira Tamsaz
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Soy protein based films and fibres for soft tissue engineering  
Teresa Büttner
Teresa Büttner

2014

Valentina Miguez-Pacheco
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Bioactive glass scaffolds with enhanced bioactivity by controlles metal ion release
Muhammad Saad Ali
Muhammad Saad Ali

2014

Preethi Balasubramanian
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Optimization of the sintering parameters of boron doped bioactive glass scaffolds prepared by foam-replica technique
Simone Link
Simone Link

2014

Qiang Chen
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Bioactive coatings with drug delivery capability by electrophoretic deposition 
Peter Weißkopf
Peter Weißkopf

2014

Dr. Julia Will,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Hydroxyapatite-Bioglass® composite scaffolds for bone tissue engineering
Janine Völkel
Janine Völkel

2014

Dr. Judith Bortuzzo,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Blends of polyglycerol sebacate (PGS) and polycaprolactone (PCL) for soft tissue applications
Yvonne Thomson
Yvonne Thomson

2014

Dr. Julia Will,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Fabrication and investigation of TCP (Tricalciumphosphate)/bioactive glass scaffolds
Jessica Strauss
Jessica Strauss

2014

Qiang Chen, Wei Li,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

EPD of microsphere-biopolymer composite coatings for drug delivery application
Ellen Scheithauer
Ellen Scheithauer

2014

Wei Li,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Fabrication of scaffolds with microsphere coating for bone tissue engineering
Fabienne Röschel
Fabienne Röschel

2014

Dr. Judith Bortuzzo, Samira Tansaz, Prof. Dr.-Ing. habil. Aldo R. Boccaccini

PGS-PCL-blends for soft-tissue applications
Lisa Ott
Lisa Ott

2014

Luis Cordero-Arias,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic deposition of biomolecules
Cita Löhr
Cita Löhr

2014

Abirami Sengottuvelan,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Design and development of mesoporous silica-polymer composites for tissue engineering
Thomas Kreller
Thomas Kreller

2014

Dr. Julia Will,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Production and characterisation of polymer coated TiO2 scaffolds
Rohit Agarwal
Rohit Agarwal

2014

Dr. S. Lyer (Experimentelle Onkologie und Nanomedizin),
Prof. C. Alexiou (Experimentelle Onkologie und Nanomedizin),
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Investigation of the influence of different storage conditions on stability and effectiveness of nanoparticles loaded with a chemotherapeutic agent
Anna Seufert
Anna Seufert
2014

Yaping Ding (WW5), Dr. Judith A. Roether (WW5), Prof. D. W. Schubert (WW5), Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Fabrication and characterization of PHB/PCL fibermats containing inorganic nanoparticles  for bone tissue engineering

Jördis SchröderJördis Schröder

2014

Luis Cordero-Arias, Prof. Dr.-Ing. habil. Aldo R. Boccaccini

EPD of organic/inorganic coatings with tailored roughness and its influence on the mechanical properties and electrochemical behaviour

Leon KümmritzLeon Kümmritz

2014

Bapi Sarker, Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Investigation of in vitro bioactivity of alginate-gelatin crosslinked hydrogel-based scaffolds 

Kasturi C. LakheKasturi C. Lakhe

2014

Dr. Raquel Silva,Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Composite materials based on proteins and alginate for tissue engineering 

Houda IchantiHouda Ichanti

2014

Valentina Miguez-Pacheco, Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Processing and characterization of metal ion releasing scaffolds for bone tissue engineering

Daniel HoffmannDaniel Hoffmann 2014

Valentina Miguez-Pacheco, Prof. Robin Klupp Taylor (Institute of Particle Technology), Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Conductive bioactive scaffolds

Tamara GlowienkaTamara Glowienka

2014

Dr. Sandra Cabañas Polo, Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic deposition of PEEK/silica coatings

Monika GellnerMonika Gellner

2014

Dr. M. Vielreicher, Prof. Dr. Dr. O. Friedrich (MBT), Dr.-Ing. R. Detsch, Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Process optimization of detection and analysis of extracellular matrix (ECM) production of mesenchyme-derived cells in 2D and 3D cell models

Dirk DippoldDirk Dippold

2014

Marwa Tallawi, Dr. Judith A. Roether (WW5), Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development and characterisation of hierarchically structured cardiac patches based on polyglycerol sebacate (PGS)

Merve Demir
Merve Demir

2014

T. Zehnder,Dr. R. Detsch, Prof. Dr.-Ing. habil. Aldo R. Boccaccini

3D-Bioplotting of a hard and a soft matrix to create hybrid scaffold structures

Carina DeißlerCarina Deißler

2014

Qiang Chen,Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic deposition of cellulose nanocrystals/-biopolymer composite coatings for drug delivery applications 

Sonja BuchholzSonja Buchholz 2014

Yaping Ding (WW5),Dr. Judith A. Roether (WW5), Prof. Dirk W. Schubert (WW5), Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Bioactive PHB/PCL fibre mats by electrospinning methods

Lena Bartelt
Lena Bartelt

2014

Luis Cordero-Arias,Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic deposition of bioactive glass/biocompatible polymer composite coatings with the incorporation of growth factors

Alicia Zörner
Alicia Zörner
2014

Prof. Olivia Graeve (University of California, San Diego, USA),
Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Luminescence behavior in doped Hydroxyapatite powders
Constantin Ott
Constantin Ott
2014

Dr. J. A. Roether (WW5),
Prof. Dr.-Ing. habil. Aldo R. Boccaccini,
Prof. D. W. Schubert (WW5)
Environmental effetc on the electrospinngin process of biodegradable polymer fibers
Pirmin Molz
Pirmin Molz
2014

T. Zehnder,
Dr. R. Detsch,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Optimisation of the shape and size of alginate-based microcapsules
Carolin Michalczyk
Carolin Michalczyk

2014

Yuyun Yang,
Prof. Sanna Virtannen (WW4), Prof. Dr.-Ing. habil. Aldo R. Boccaccini

PCL/Bioglass composite coating on pure magnesium
Dominik Kaufmann
Dominik Kaufmann

2014

Samira Tansaz,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Preparation and characterization of composite biofilms for wound dressing applications
Isabell Hußnätter
Isabell Hußnätter

2014

Dr. Sandra Cabañas Polo,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic deposition of chitosan/bioactive glass composite coatings incorporating metallic ions
Philip Hofmann
Philip Hofmann

2014

Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Critical data analysis of the electrospinning process of biopolymers for fibrous scaffold production for biomedical applications
Dennis Graf
Dennis Graf

2014

Dr. R. Tietze (Division Experimental Oncology/Nanomedicine),
Prof. C. Alexiou (Division Experimental Oncology/Nanomedicine),
Prof. Dr. –Ing. habil. Aldo R. Boccaccini

Development of t-PA containing supermagnetic iron oxide nanoparticles utilizing surface modifications of dextran coatings
Karten Gerchau
Karsten Gerchau

2014

Anahi Philippart,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Study of biodegradable polymer coating on mesoporous bioactive glass scaffolds
Ferdinand Friebe
Ferdinand Friebe

2014

Dr.- Ing. R. Detsch,
Prof. Dr. –Ing. habil. Aldo R. Boccaccini

Development of in vitro assays to investigate remodelling processes
Sinem Demir
Sinem Demir

2014

Yaping Ding (WW5),
Dr. Judith A. Roether (WW5),
Prof. Dirk W. Schubert (WW5),
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

The fabrication and characterization of PHB/PCL/sol-gel derived silica fibermats with drug releasing property
Julia Böttcher
Julia Böttcher

2014

Dr. Sandra Cabañas Polo
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic Deposition of Bioactive Glass/Synthetic Polymer Coatings on Stainless Steel
Veronika Albert
Veronika Albert

2014

Prof. Olivia Graeve (University of California, San Diego, USA),
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Microstructure development and devitrification behavior of amorphous metals for bone implant applications
Thomas Schuffenhauer
Thomas Schuffenhauer

2014

Dr. Sandra Cabanas Polo
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic deposition of TiO2 nanoparticles: effects of solvents and additives on deposit quality 
Jonas Hazur
Jonas Hazur

2014

Anahi Philippart
Dr. Sandra Cabanas
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development of porous scaffolds by electrophoretic deposition  
Lena Haunschild
Lena Haunschild

2014

Anahi Philippart
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Enhancing the functionality of mesoporous bioactive glass based scaffolds 
Aukha Stoppa
Aukha Stoppa

2013 - 2014

Dr. Raquel Silva,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Novel hydrogels for cartilage tissue engineering 
Lena Vogt
Lena Vogt

2013 - 2014

Yaping Ding (WW5),
Dr. Judith A. Roether (WW5),
Prof. Dirk W. Schubert (WW5),
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Multilayer structures with bioactive glass scaffolds and polymer fibres for osteochondral tissue engineering 
Dominick Grams
Dominick Grams

2013 - 2014

Dr. Menti Goudouri,
Prof. Dr. –Ing. habil. Aldo R. Boccaccini

Synthesis and characterization of antibacterial fibrous scaffolds for periodontal tissue regeneration 
Paul Seißler
Paul Seißler

2013 - 2014

Qiang Chen
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrophoretic deposition of nanocrystals based composite coatings
Vera Bednarzig
Vera Bednarzig

2013 - 2014

Dr. U. Lohbauer (Universitätsklinikum Erlangen),
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Setting- and neutralisation behaviour of self- adhesive dental cements 
Jonas Hahn
Jonas Hahn

2013 - 2014

Elena Boccardi, Anahi Philippart,
Prof. Dr. –Ing. habil. Aldo R. Boccaccini

Nanoparticle coatings on 45S5-Bioglass®-based scaffolds for bone tissue engineering 
Christopher Ruzok
Christopher Ruzok

2013 - 2014

Yaping Ding (WW5),
Dr. Judith A. Roether (WW5),
Prof. Dirk W. Schubert (WW5),
Prof. Dr. –Ing. habil. Aldo R. Boccaccini

Electrospinning of polymer-nanoparticle blends for tissue engineering 
Bernhard Friedrich
 Bernhard Friedrich

2013 - 2014

Dr. Sandra Cabañas,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development and characterization of free-standing membranes based on silica nanoparticles infiltrated with biopolymers
Katharina Schuhladen
Katharina Schuhladen

2013 - 2014

Preeti Balasubramanian,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Functionalisation of bioactive glass scaffolds
Jonathan Potschka
Jonathan Potschka

2013 - 2014

Jasmin Hum,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Investigation of protein coated 45S5®-based scaffolds for bone tissue engineering
Teresa Müller
Teresa Müller

2013 - 2014

Dr. Judith Roether (WW5),
Yaping Ding (WW5),
Prof. rer. nat. habil. Dirk W. Schubert (WW5), Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Fabrication and characterization of electrospun PHB/PCL/sol-gel derived bioactive glass scaffolds
Xenia Kraus
Xenia Kraus

2013 - 2014

B. Merle (WW1),
Prof. M. Goeken (WW1),
M. Tallawi,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Characterisation of the mechanical properties of biopolymers for soft tissue engineering
Matthias Herrmann
Matthias Herrmann

2013 - 2014

Dr. R. Detsch, Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Application of nano-sized bioactive glasses in different material systems for bio-fabrication
Lisa Hench
Lisa Hench

2013 - 2014

Dr. rer. nat. Stefan Lyer,
Prof. Dr. med. Christoph Alexiou,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Studies on the accumulation behavior of magnetic iron oxide nanoparticles in a flow model
Julia Graubmann
Julia Graubmann

2013 - 2014

Dr. R. Silva, Dr. R. Detsch, Prof. Dr. –Ing. habil. Aldo R. Boccaccini

Protein based nanomaterials for cell encapsulation for bone-regeneration
Anke Metze
Anke Metze

2013 - 2014

Prof. Dr.-Ing. habil. A.R. Boccaccini,
Dr. Fatemehsadat Pishbin (in collaboration with Prof. Mary P. Ryan, Imperial College London, UK)

Electrophoretic deposition of multifunctional coatings based on graphene oxide and chitosan for medical applications
Shiva Naseri
Shiva Naseri

2013

Jasmin Hum,
Prof. Showan Nazhat (McGill University, Canada),
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Collagen-bioactive silicate composite scaffolds for bone tissue engineering
Buse Bulut
Buse Bulut

2013

Dr. R. Silva,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Protein/bioactive glass composites
Jannik Stein
Jannik Stein

2013 - 2014

Dr. P. Tripal (Experimental Oncology / Nanomedicine, UK Erlangen) 
Prof. C. Alexiou (Experimental Oncology / Nanomedicine, UK Erlangen)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Toxicity, cellular uptake and photometric quantification of metal oxide nanoparticles 
Alexander Stenzel
Alexander Stenzel

2013 - 2014

M. Tallawi
Prof. M. El Fray (West Pomeranian University of Technology, Poland)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

 

Polymer-silica composites for tissue engineering 
Harald Unterweger
Harald Unterweger

2013

Dr. rer. nat. Rainer Tietze
Prof. Dr. med. Christoph Alexiou
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development and characterization of Cisplatin-bearing magnetic iron oxide nanoparticles with hyaluronic acid coating for application in drug delivery and hyperthermia 
Raena Morley
Raena Morley

2013

Anahi Philippart
Prof. Dr. –Ing. habil. Aldo R. Boccaccini

Investigation of polymer coatings on mesoporous bioactive glasses 
Lukas Schwarz
Lukas Schwarz

2013

Dr. Sandra Cabañas Polo
Dr. H. Maeda (Nagoya Institut of Technology, Japan)
Prof. Toshihiro Kasuga (Nagoya Institut of Technology, Japan)
Prof. Dr.-Ing. habil. Aldo R. Boccaccin

 Electrophoetic deposition of bioceramic-chitosan composite layers
Tobias Hochburger
Tobias Hochburger

2013

Dr. R. Rai,
Prof. D. W. Schubert (WW5),
Dr. J. A. Roether (WW5),
Prof. Dr. –Ing. habil. Aldo R. Boccaccini

Development of heart patches with varying surface cues for cardiac tissue engineering
Helene Sachsenweger
Helene Sachsenweger

2013
Master -MAP- student

Dr. U. Deisinger (WW3),
Prof. A. Roosen (WW3),
Dr. R. Detsch,
Prof. Dr.-Ing. habil. A. R. Boccaccini

Development and application of a piezoceramic actuator for bone cell stimulation 
Philipp Odenwald
Philipp Odenwald

2013

Qiang Chen
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Multilayered bioactive coatings by EPD
Florian Högl
Florian Högl

2013

Dr. Sandra Cabañas-Polo
Prof. C. Alexiou (Division Experimental Oncology/Nanomedicine)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development and characterization of nanostructured titania containing composite membranes by electrophoretic deposition and solution dipping
Florian Ruther
Florian Ruther

2013

Alexander Hoppe
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Metal ion containing bioactive glass derived 3D scaffolds with enhanced mechanical strength
Daniel Nieopek
Daniel Niopek

2013

Anahi Philippart
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Mesoporous bioactive glasses for tissue engineering and drug delivery

Ekaterina ScheßlerEkaterina Scheßler

2013

Preethi Balasubramanian
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Bioactive glass with natural proteins for osteochondral tissue engineering

Caroline VogelCaroline Vogel

2013

Dr. Menti Goudouri
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Sol-gel processing of novel bioactive ceramics for dental applications

Anne-Sophie
Mertgen
Anne-Sophie Mertgen

2013

Marwa Tallawi
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

In vitro dynamic degradation behavior of matrices for cardiac patch application

Maria SolimMaria Solim

2013

Sigrid Seuss
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

AC-EPD of chitosan/Bioglass® composite coatings with drug delivery capacity

Tina PiegerTina Pieger

2013

Preethi Balasubramanian
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Coating of 45S5 Bioglass scaffolds by electric field assisted processes

Elias PalpanesElias Palpanes

2013

Luis Cordero
Prof. C. Alexiou (Division Experimental Oncology/Nanomedicine)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development and characterization of nanostructured ZnO containing composite coatings by electrophoretic deposition

Tobias IgelspacherTobias Igelspacher

2013

Preethi Balasubramanian
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Surface functionalization of 3D Bioglass scaffolds with Alkaline Phosphatase

Christian GrailChristian Grail

2013

Dr. Julia Will
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Titania-Foams with Bioglass®-Chitosan coating as Bone-Tissue-Scaffolds

Maja LehmannMaja Lehmann

2013

Sigrid Seuss
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Influence of different particle sizes on the biological behaviour of bioactive glass/chitosan composite coatings

Tobias HochburgerTobias Hochburger

2013

Dr. R. Rai
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Dr. J. A. Roether (WW5), Prof. D. W. Schubert (WW5)

Development of heart patches with varying surface cues for cardiac tissue engineering


Julia RompfJulia Rompf

2013

Dr. R. Detsch
Prof. B. Fabry (Biophysics Group)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Characterisation of hydrogels for cell encapsulation and printing


Azim YaziciAzim Yazici

2013

Luis Cordero
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Bioactive glass/chitosan coatings by EPD


Patrick SonnleitnerPatrick Sonnleitner

2013

Sigrid Seuss
Prof. Dr.-Ing. habil.Aldo R. Boccaccini

Antimicrobial Bioglass®-chitosan composite coatings on 2D and 3D substrates


Henrike KlassenHenrike Klassen

2013

Dr. R. Rai
Prof. Dr.-Ing. habil.Aldo R. Boccaccini

Electrospun fibrous scaffolds based on poly(glycerol sebacate) and biopolymer blends for cardiac patch applications


Dominik HeusingerDominik Heusinger

2013

Dr. R. Detsch
Dr. S. Rath (Universitätklinik Erlangen)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

In vitro osteogenesis investigations in soft matrices

Tobias ZehnderTobias Zehnder

2012-2013

Dr. R. Detsch
Dr. J. Kaschta (WW5)
Prof. D. W. Schubert (WW5)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Characterization and processing of modified alginate soft matrices for 3D cell-printing

Hans GruhnHans Gruhn

2013

Dr. Menti Goudouri
Prof. Dr.-Ing. habil. A. R. Boccaccini

Bioactivity investigation of bioactive glasses of different compositions

Sandra GreinerSandra Greiner

2013

Anahi Philippart
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Multifunctional bone scaffolds based on mesoporous bioactive glasses

Maximilian GeilerMaximilian Geiler

2013

Dr. Menti Goudouri
Prof. Dr.-Ing. habil. A. R. Boccaccini

Bioactive glasses and glass-ceramics in restorative dentistry

Sarah WichmannSarah Wichmann

2012-2013

Marwa Tallawi
Dr. Ranjana Rai
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Electrospun fibers of synthetic polymers blended with natural proteins for cardiac tissue engineering

Anna-Lena
Ziegler
Anna-Lena Ziegler


2012-2013

Dr. Ranjana Rai
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Studying the degradation behaviors of matrices for Cardiac Patch application

Marion HeinlothMarion Heinloth

2012 - 2013

S. Seuß
Prof. Dr.-Ing. habil. A.R. Boccaccini
Development of bioactive composite layers with antimicrobial properties

Miriam SchmidtMiriam Schmidt

 

2012 - 2013

Dr. R. Detsch
Prof. Dr.-Ing. habil. Aldo R. Boccaccini,
Dr. Martin Vielreicher
Prof. Oliver Friedrich (Lehrstuhl für Medizinische Biotechnologie)

Multiphoton-Microscopy-based Analysis of engineered Tissue Matrices for optimizing Cell-Scaffold-Interactions in Regenerative Medicine

Teresa BüttnerTeresa Büttner

Dr. Ranjana Rai,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Biopolymer for cardiac tissue engineering

The research assistant work was+ been carried out in the framework of BIOSCENT project.

Felipe TapiaFelipe Tapia

Mai - Dezember 2012

Dr. Yvonne Genzel (Gruppe für Bioprozesstechnik, Max Planck Institut für Dynamik komplexer technischer Systeme),
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Production of cell culture-based human influenza virus in single-use hollow fiber bioreactors

Mani Diba

Mani Diba

Mai - Dezember 2012

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Prof. Robin N. Klupp Taylor, MEng, DPhil (Oxon) (Institute of Particle Technology, FAU),
Dr. Mary P. Ryan (Department of Materials, Imperial College London, UK)

Electrophoretic deposition (EPD) processing of inorganic and composite nanostructured coatings/films

Taimoor H. Quazi

Taimoor Qazi

Mai - Dezember 2012

Dr. Ranjana Rai,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

 

Development of electroactive surfaces of poly(glycerol sebacate) based patches for cardiac tissue engineerin

Sonja Meyer

Sonja Meyer

Mai - Dezember 2012

Ms Ch. Podszuck (Biotronik)
Prof. Dr.-Ing. habil. A. R. Boccaccini

Development and examination of a chloride-free etching process of small implant parts made from stainless steal to target repetitious and controlled etching effects

Kai Preißinger

Kai Preissinger

Mai - Dezember 2012

Dr. Kay Raum (Julius-Wolff Institute, Charité Universitätsmedizin Berlin)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Stimulation of mesenchymal stromal cells (MSC) by a novel low-intensity pulsed ultrasound (LIPUS) system

Eva Weber

Eva Weber

Mai - Dezember 2012

Dr. J. A. Roether (WW5)
Patcharakamon Nooeaid (WW7)
Prof. D. W. Schubert (WW5)
Prof. Dr.-Ing. habil. A. R. Boccaccini

Development of bi-layer structures for osteochondral tissue engineering

Dirk Dippold

Dirk Dippold

März - Oktober 2012

Dr. Ranjana Rai
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Conductive polymer containing composites for cardiac patch applications

Roman Wolf

Roman Wolf

März - Oktober 2012

Dr. R. Rai
M. Tallawi M.Sc.
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Composite matrices based on poly(glycerol sebacate) and inorganic fillers for cardiac patch application

Erik Wirth

Erik Wirth

März - Oktober 2012

Dr. R. Rai,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

 

Poly(glycerol sebacate)/poly(ε-caprolactone) based matrices for cardiac patch application

Tamas Steinbach

Tamas Steinbach

März - Oktober 2012

M. Tallawi, M.Sc.
Dr. Ranjana Rai,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development of cadiac patches from Polyglcerol-sebacate (PGS) blends

Liang Liang

Liang Liang

März - Oktober 2012

Dr. Julia Will
Dr. S. Rosiwal (WW2)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Bioactive coatings on diamond surfaces

Jennifer Kohlhage

Jennifer Kohlhage

März - Oktober 2012

Dr. J. A. Roether (WW5)
Prof. D. W. Schubert (WW5)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

P3HB and P3HB-silica nanocomposites for tissue engineering applications


(in collaboration with the Institute of Polymer Matrialis, WW5)

 

Iris Emtmann

Iris Emtmann

März - Oktober 2012

T. Weidner (BVT)
Dr. J. Will
Dr. R. Detsch
Prof. R. Buchholz (BVT)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development of a perfusion system to determine the biocompatibility of ceramic scaffolds for tissue engineering
Stefan Kreppel

Stefan Kreppel

März - Oktober 2012

 

Dr. Ulrich Lohbauer (Zahnklinik 1)
Dr. H. Hornberger,
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

 

The effect of bioactive nanofillers on mechanical performance of dental adhesives
Julia Degner

Julia Degner

März - Oktober 2012

 

Prof. Sannakaisa Virtanen
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

 

Biodegradable Coatings on Magnesium(-alloys)
Alexandra Grigore

Alexandra Grigore

März - Oktober 2012

 

Dr.-Ing. Rainer Detsch
Prof. Ben Fabry (Biophysics Group)
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

 

Development and characterization of soft matrices for cell encapsulation
Martin Schütz

Martin Schütz
März - Oktober 2012


Dipl.-Ing. Jasmin Hum
Dr. Ulrich Kneser
Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Development of Bioactive glass-collagen scaffolds
Felix Stützer

Felix Stützer

März - Oktober 2012

 

Dipl.-Ing. S. Seuss
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Chitosan-bioactive glass coatings by EPD for tissue engineering
Simon Dreyer

Simon Dreyer

Oktober - März 2012

 

Dr. V. Häublein (IISB)
Dr. H. Hornberger
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Ion implantation on biomedical materials
Tobias Reichel

Tobias Reichel

Juli - Januar 2012

Dipl.-Ing. A. Hoppe
Prof. A. Lenhart (Georg-Simon-Ohm University of Applied Sciences - Nuremberg) Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Development and characterisation of novel ion doped bioactive glasses (BG) and BG-derived bone tissue scaffolds
Anja Dörfler

Anja Dörfler

Juli - Januar 2012

S. Romeis (LFG)
C. Eismann (LFG)
Prof. W. Peukert (LFG)
R. Detsch
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Biocompatibility of sub-micrometric 45S5 Bioglass® powder
Nadia Fouladi-Movahed

2011

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Dipl.-Ing. Sigrid Seuß

Development of biopolymer-ceramic nanoparticle composite coatings by electrophoretic deposition for orthopaedic applications
Matthias Herrman

Matthias Herrmann
Mai - Oktober 2011

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Alejandra Chavez PhD
Alternating Current (AC) and Pulsed Dircect Current (Pulsed-DC) Electrophoretic Deposition (EPD) of inorganic nanomaterials
Nusret Sena Güldal

Nusret Sena Güldal
Mai - Oktober 2011

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Glass-Ceramic Scaffolds with Enhanced Bioactivity for Bone Tissue Engineering
Alexandra Grimm

Alexandra Grimm
Mai - Oktober 2011

Jasmin Hum
Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Polymer coated bioactive inorganic scaffolds for use in the regenerative medicine

Lukas Weidenbacher

Lukas Weidenbacher

Mai - Oktober 2011

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Dipl.-Ing. Alexander Hoppe
Ion doped bioactive glasses and glass-ceramics for bone tissue engineering through ion exchange process

Alexander Ritter

Alexander Ritter

Mai - Oktober 2011

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Development of polymer-coated TiO2 foams for bone regeneration

Stefan Grimm

Stefan Grimm

Mai - Oktober 2011

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Dipl.-Ing. Alexander Hoppe
Fabrication and characterization of 3D highly porous scaffolds with enhanced biocompatibility based on ion doped bioactive glasses
Johannes Thoma
Johannes Thoma

April - September 2011

Dr. Julia Will
Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Dr. Melanie Potthast (SIEMENS Healthcare)

Creation of a Liverphantom for MRT
Anke-Lisa Metze
Anke-Lisa Metze

April - September 2011

Patcharakamon Nooeaid M.Sc.
Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Natural polymer coated 45S5 Bioglass® based scaffolds for bone tissue engineering
Jannik Stein
Jannik Stein

April - September 2011

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Alejandra Chavez PhD

Biodegradable polymer-ceramic nanocomposite coatings by Electrophoretic Deposition
Harald Unterweger
Harald Unterweger

April - September 2011

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Dipl.-Ing Alexander Hoppe

Porous 3D-scaffolds for bone tissue engineering based on polymer/glass composites
Michael Pröpster
Michael Pröpster

March - August 2011

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Prof. D. Schubert (WW5)
Dr. J. Kachtka (WW5)

Development and characterisation of PHB and PHBV composites with 45S5 Bioglass ® and other anorganic fillers

Julia GraubmannJulia Gaubmann

March - August 2011

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Dipl-Ing. Sigrid Seuß

EPD of bioactive nanoparticles and biopolymers for antibacterial coatings of orthopaedic implants

Birgitta Carlé
Birgitta Carle

March - August 2011

Prof. Dr.-Ing. habil. Aldo R. Boccaccini

Polymer coatings of TiO2-scaffolds for biotechnological applications

Lukas Schwarz
Lukas Schwarz
Februar - Juli 2011

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Dipl.-Ing. Jasmin Hum
Investigation of functional biopolymer coated nanostructured glass-ceramic scaffolds for bone tissue engineering
Friederike Gebhardt
Friederike  Gebhardt
June - December 2010

Prof. Dr.-Ing. habil. Aldo R. Boccaccini
Prof. S. Virtannen (WW4)
Dipl.-Ing Sigrid Keim
Electrophoretic depostion on magnesium alloys
Vincent Bürger
Vincent Bürger

June - December 2010

Prof. Dr.-Ing. habil. Aldo R. Boccaccini,
Prof. Lothar Wondraczek (WW3)
Dipl.-Ing. Alexander Hoppe
Dipl.-Ing. (FH) Robert Meszaros(WW3)

Effect of residual stresses on bioactive glass bioreactivity

Alexander Kent

Alexander Kent

June - September 2010 Fabrication and characterisation of highly porous three-dimensional bioactive glass-based scaffolds for bone tissue engineering

Paul Ritter

Paul Ritter

May - August 2010 Electrophoretic Deposition (EPD) of Polyetheretherketone Coatings on Stainless Steel

 

Former students at Imperial College (London)  only MSc students are listed

Name Year Research topic
Peng, Huan 2010 Bioactive composite coatings by means of electrophoretic deposition
Wang, Jiong 2010 Development of highly porous polymer coated bioactive glass composite scaffolds for bone regeneration
Luan, Xuke 2009 Bioactive polymer coated composite Bioglass foams containing nano particles for tissue engineering
Sheikh, Ann 2009 Bioactive glass/polymer composite foams with antibacterial properties for tissue engineering scaffolds
Zhou, Jinqiu 2009 Optomechanical glass matrix composites
Ioannou, John 2008 Bioglass matrix composites containing carbon nanotubes for bone tissue engineering
Jeong, Hyun-chul 2008 Polymer/ceramic composite on a metallic substrate by means of electrophoretic deposition
Mantsos, Tryfon 2008 Development of polymer coated bioactive glass composite scaffolds for tissue engineering
Feng, Zixia 2007 Fabrication and characterisation of poly(D,L-lactic acid) coated 45S5 bioglass based scaffolds for bone tissue engineering
Liu, Lizheng 2007 Processing and characterisation of silicate glass matrix composites containing carbon nanotubes (CNTs)
Pang, Bo 2007 Optically transparent fibre reinforced glass matrix composites
Baker, Nicholas 2006 Enhancing the understanding of the production and performance of poly (D,L-lactic acid) and bioglass composites
Arvanitelis, C. 2006 Colloidal pocessing of a SiO2 and carbon
Hong, Young-Ju 2006 Carbon nanotubes/45S5 Bioglass® composite scaffolds using Electrophoretic deposition (EPD)
Shaun Nishant Sinniah, B. 2006 Novel production methods for NiTi foams and TiO2/PEEK composite cosatings
Takun, Zeeyad 2006 Biodegrable polymer matrix composites containing nanoparticle ceramics and bioactive glass for tissue engineering applications
Sheikh Md Fadzullah, Siti Hajar 2005 Bioresorbable and bioactive polymer matrix composites containing ceramic nanoparticles for tissue engineering
Yosef, Feras 2005 Carbon nanotubes coatings using electrophoretic deposition (EPD)
Lim, Kheng Jin John
2003 Bioglass/polymer composite foams and ligaments for tissue engineering applications
Ng, Siu Yan Angel 2003 Piezoelectric ceramic coatings and composites by electrophoretic deposition (EPD)
Sun, Baoguo 2003 Processing of TiO2 matrix composites by electrophoretic deposition and slurry dipping
Blaker, Jonathan 2002 Preparation and characterisation of novel composites materials based on bioresorbable polymer substrates and bioactive glasses for tissue engineering applications


Daniel Christa